...his cheap alternative configuration. Remove your extension lead and plug the modem directly into the telephone socket. Then purchase a longer network cable and run that to your PC.
Anther option is to use a wireless router such as the TalkTalk Echolife HG520s and plug the router direc
...crete, or resistance, the signal has to push through. Attenuation between your exchange and the test socket in your house is almost entirely determined by cable length and cable type. Ideally your attenuation is as low as possible.
SNR
Signal to noise ratio, also known as noise margin
... our equipment and therefore your speed can be different as factors other than line length affect your attenuation. For example
The quality of the cable
The true length of the cable which can differ substantially from what we have been told
The number of joins in the cable
The ag
...ference.
I changed all my filters to the one's included in my huwaii modem, just incase my old one's had a problem, and I also used the huwaii rj-11 cable to connect the router to the filter.
Router Setup
Firmware seemed to help a lot, at this time I have the latest U
... to your test socket. What is a master socket, what is a test socket, do you have one and why is it done ?
What is a master socket
When the phone cable enters your house for the first time it is presented to you in at a socket. The first socket it connects to * is commonly known as the
...deos.
For the TalkTalk HG520s and MT882 routers the login in pages are normally at http://192.168.1.1 when they are connected by an ethernet network cable or http://192.168.1.2 if they are connected via USB. When you connect their default username and password are both "admin" in low
...ly depending on whether its connected via Ethernet or USB.
Ethernet
Connect the router to your computer's network card using the supplied network cable
Browse to http://192.168.1.1
Log in using the default settings username = admin and password = admin
USB
Make sure software
...e with G.dmt)
USB
Green
Flashing
USB Connection in use
Note: NEVER connect both the USB and Ethernet cables to the same PC as this may terminally damage the device.
Note: When using an Ethernet cable and the modem has "G
...ith Bps (bytes per second).
So what factors affect your sync speed? Things like line attenuation and electrical noise reduce the efficiency of your cable and mean the modems have to sync at a slower speed to maintain a decent connection.
Line attenuation, which is the loss of signal as
...ER
To configure the router you need to connect to it. You have two options here, wired or unwired. Wired is the easiest, just use the supplied network cable (usually red) and plug it into LAN1 on the router and plug the other end into your PC. All being well after about 30 seconds you should be
...tooth, Skype, a universal remote control, Blackberry Connect or ActiveSync...
In the iPhone Box
iPhone Stereo Headset Dock Dock Connector to USB Cable USB Power Adapter Documentation Cleaning/polishing cloth
Specifications & Overall Impression
GSMQuad-band (850, 900, 1800
...ions. Go through them from start to finish and make sure you have everything you need to hand. Have your password letter ready, make sure you have all the cables you need and spare sockets to plug them in to. I find it easy to place the modem where it will end up and have the cable and power in plac
... phone and the modem into the microfilter. The filters are usually clearly marked and even if it isn't then there is only one way both cables will fit so you don't need to worry too much about it.
HELPFUL HINT: If you have problems with your broadband setup you may be
...et they have is the master socket originally installed by BT.
Call me a cynic but BT sockets appear to be installed as near as possible to where the cable meets the house and not anywhere convenient, in my house this is in the front room under the window and I have no other extension sockets
...ample, a change of address or to your title. You confirm that you will inform us of any change to your personal information as soon as is reasonably practicable in order that we may update our records. Please note that notification of any change to your personal information must be in writing (to th
Please note that this Web site and the associated forums are beta-labs and often staging areas of pre-launch systems. Feel free to use the site, however, be aware that we may remove any data or functionality at any time :)
News Feed
Facebook
del.icio.us
StumbleUpon
digg